Microlab PRO-1 User Manual download pdf (Page 39)

GPX Pro 34

The first column is the channel number and name of that input. Note that the last 2 items (gear

calculated and acceleration) are not connected to actual wire inputs -- they are "virtual" channels

of data which you can capture. The item "Inductive RPM Pickup" corresponds to a wire wrapped

around a spark plug on the BLUE WIRE OF CABLE "A".

Each channel may independently be enabled (data will be captured) or disabled. Even if a

channel is disabled for capture, it will still display current values on the various screens if it is

properly calibrated. For example, you can still see RPM on your main screen even if it is not being

captured.

Each channel has an individually configurable capture rate (see below). Depending on the type of

input, from a minimum of 5 samples per second (Hz) to a maximum of 250 samples per second

may be captured.

The Left and Right arrows move from item to item. When you are positioned at an item you wish

to modify, press Select. (As usual, press Menu to exit out of this screen.)

When you press Select, either the item will be modified "in-place", or a menu of selections will

be displayed. For example, when you change the Hz (capture rate), the "highlight" will change

from reverse to a box:

When the box is outlined, you make changes as normal - Left and Right to cycle through the

choices, Select to make that selection, Menu to exit.

When you press Select on a Channel/Name entry, you can change the type of that input. Select

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 98 99

No comments

Microlab PRO-1 User Manual Page 39